LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1138 (Maintenance, Diagnosis (Maintenance Procedures) (Coupe)) >> 03 Maintenance, Diagnosis >> Maintenance Procedures >> Spark Plugs, Replacing >> 4-Cylinder 2.0L TFSI Gasoline Engines >> Version 2 Installing

Version 2 Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Install the new spark plugs using spark plug wrench:VAS 3122B  and tighten them to the tightening specification.

-- Lubricate the ignition coils. Refer to IGNITION COIL, LUBRICATING .

-- Align all the ignition coils one after the other and insert them loosely into the spark plug shaft.

-- Press the ignition coils evenly onto the spark plugs by hand. Do not hit them.

-- Tighten the screws on the ignition coils to the tightening specification.

-- Connect the connector at the same time.

-- Install engine cover. Refer to ENGINE COVER, REMOVING .

Tightening Specifications Nm
Spark plugs in cylinder head 30
Ignition coil screw 10
scientia non olet · About LEMON Manuals