LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1138 (Maintenance, Diagnosis (Maintenance Procedures) (Coupe)) >> 03 Maintenance, Diagnosis >> General Information >> Vehicle Checks During Inspection And Maintenance

Vehicle Checks During Inspection And Maintenance

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

It is recommended to use VAS 5000 or VAG 1858 to perform the vehicle tests.

Brakes Inspection

Refer to the brake system service information for more information about testing brakes on FWD and AWD vehicles.

Performance Check

Perform a performance check only on test stands recommended by Audi AG. The corresponding correction factors for automatic transmissions and AWD are provided in these test stands. Vehicles with AWD may only be tested on a four-wheel performance test stand.

Tachometer Check

With the tachometer test, the vehicle wheels are driven. Vehicles with AWD may only be tested on a four-wheel test stand.

Shock Absorber Check

Information on testing shock absorbers can be found in the suspension service information.