Front Wheel Housing Liner, Removing And Installing, AUDI RS5: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Driveshaft Cover, Nuts And Wing Nut -2-

-- Remove the nuts -1- .

-- Remove the drive axle cover.

-- Remove the wing nut -2- on the left side of the vehicle and remove the expanding clip on the right side of the vehicle.

-- Remove the bolts -1- .

Fig 2: Identifying Bolts And Clips To Wheel Housing Liner, Removal

-- Remove the bolt -3- and remove the mount on the fender.

-- Remove the clip -1- from the wheel housing liner -4- .

-- To remove the clips -3- , unlock the release lever -2- with needle nose pliers in direction of -arrow A- and push it off the pin -1- in direction of -arrow B- .

Fig 3: Identifying Clips -3-, Release Lever -2- And Pin -1-

-- Remove the wheel housing liner.