Overview - Cover And Cushion, Bench Seat With Center Storage Compartment

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Bench Seat With Center Storage Compartment Overview

Courtesy of AUDI OF AMERICA, LLC

Cover
- Removing and installing. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT .
- Separate The Cover From The Padding. Refer To COVER AND PADDING, SEPARATING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT
Molding
- Sewn Into Cover
- For Engaging The Cover In The Rear And Side Channel At The Center Armrest
Contour Wire
- Pushed Into The Cover
Molding
- Sewn Into Cover
- For Engaging The Cover In The Seat Frame
Left/Right Padding
- Removing and installing. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT .
- Separate The Cover From The Padding. Refer To COVER AND PADDING, SEPARATING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT
Center Storage Compartment
- Separating The Cover From The Center Storage Compartment:
  - Right Cover. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT
  - Left Cover. Refer To COVER AND PADDING, REMOVING AND INSTALLING, BENCH SEAT WITH CENTER STORAGE COMPARTMENT
- Removing and installing. Refer To CENTER STORAGE COMPARTMENT, REMOVING AND INSTALLING .
Clip
- Covered In Foam Padding
- Only With Fabric Covers
Clip
- Covered In Foam Padding
Seat Frame
Cushion Clip
- Only With Leather Covers
- For Securing The Cover To The Padding
- Always Replace If Removed
- Install In Same Location As Before Removal