LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Seat Upholstery, Covers (Coupe)) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver/Front Passenger Seat Heating Element -Z6- / -Z8-, Removing And Installing >> Driver/Front Passenger Seat Heating Element - Z6- / - Z8-, Removing And Installing, Bucket Seat >> Removing

Driver/Front Passenger Seat Heating Element - Z6- / - Z8-, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the seat pan cushion. Refer To SEAT PAN COVER AND CUSHION, REMOVING AND INSTALLING, BUCKET SEAT .

-- Cut electrical wire -5- off directly at the old seat heating element -arrow-.

Fig 1: Cutting Electrical Wire -5- Off Directly At Old Seat Heating Element -Arrow
GWWA74-10375Courtesy of AUDI OF AMERICA, LLC
NOTE:

The Old Seat Heating Element Remains On The Upholstery And The New Seat Heating Element Is Bonded Over It.

-- Remove the old electrical connection wire.