LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1121 (Seat Upholstery, Covers (Coupe)) >> 74 Seat Upholstery, Covers >> Front Seat Covers And Cushions >> Driver/Front Passenger Backrest Heating Element -Z7- / -Z9-, Removing And Installing >> Driver/Front Passenger Backrest Heating Element -Z7- / - Z9-, Removing And Installing, Standard Seat, Sport Seat >> Removing

Driver/Front Passenger Backrest Heating Element -Z7- / - Z9-, Removing And Installing, Standard Seat, Sport Seat: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove cover and cushion from backrest. Refer To BACKREST COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD/SPORT SEAT .

-- Disconnect the cover from the padding. Refer To BACKREST COVER AND CUSHION, SEPARATING, STANDARD SEAT/SPORT SEAT .

-- Cut the wire -3- off directly at the old backrest heating element -2-.

Fig 1: Backrest Heating Element, Standard Seat
GWWA74-10223Courtesy of AUDI OF AMERICA, LLC
NOTE:

The Old Backrest Heating Element Remains On The Padding -1- And The New Backrest Heating Element Is Bonded Over It.