Tie Rod End Check Dimension
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Place a steel ruler -2- on the tie rod end and push it up to the edge of the roller -arrow- on the tie rod end -1-.
- If the check dimension -a- is less than 188 mm, replace the complete steering gear with the tie rod and tie rod end as well as the control arm on this side of the vehicle.