Terminal 30 Wire Junction 2 -TV22-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Alarm Horn, Removal

GWWA92-10115

Courtesy of AUDI OF AMERICA, LLC

Vehicles Through 05/2008:

-- Unclip The Plenum Chamber Cover -2- And Remove It.

NOTE:

Ignore Items -1 And 3- And The -Arrow-.

Vehicles From 06/2008:

Fig 2: Identifying Plenum Chamber Cover

GWWA92-10166

Courtesy of AUDI OF AMERICA, LLC

-- Remove the screws -3-.

-- Remove the clips -2- from the mount and remove the plenum chamber cover -1-.

Continuation For All Vehicles:

Fig 3: Opening Terminal Box Cover

GWWA10-10851

Courtesy of AUDI OF AMERICA, LLC

-- Release the retainer -arrow A- and open the cover -arrow B-.

-- Remove the wires -1, 2, 3 and 5, 6 and 9-.

Fig 4: Identifying Terminal 30 Wire Junction 2 Components

GWWA97-10479

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -8- and remove the Terminal 30 Wire Junction 2 -TV22- from the tower brace.

NOTE:

Ignore -items 4, 7 and 10-.