LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Exterior Lights, Switches (Coupe)) >> 94 Exterior Lights, Switches >> Tail Lamps >> Rear Lid Tail Lamp, Removing And Installing >> Inner Tail Lamp, Removing And Installing, Led From My 2013 >> Removing

Inner Tail Lamp, Removing And Installing, Led From My 2013: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Cover
GWWA94-10861Courtesy of AUDI OF AMERICA, LLC

-- Turn off the ignition and remove the key.

-- Turn the headlamp switch to "0".

-- Remove the cover -1- in direction of -arrow-.

-- Disconnect the connector -5-.

Fig 2: Identifying Clamping Brackets & Nuts
GWWA94-11331Courtesy of AUDI OF AMERICA, LLC

-- Remove the nut -7- and remove the large clamping bracket -6-.

-- Remove the nuts -2 and 3- and then remove the clamping bracket -1 and 4-.

-- Remove the inner tail lamp toward the outside.