LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Exterior Lights, Switches (Coupe)) >> 94 Exterior Lights, Switches >> Tail Lamps >> Bulb Holder, Removing And Installing >> BULB SOCKET, REMOVING AND INSTALLING, LED Through MY 2012 >> Removing

BULB SOCKET, REMOVING AND INSTALLING, LED Through MY 2012: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Identifying Outer Tail Lamp
GWWA94-10776Courtesy of AUDI OF AMERICA, LLC

-- Remove the outer tail lamp. Refer to OUTER TAIL LAMP, REMOVING AND INSTALLING, LED .

-- Turn the bulb socket -1- counterclockwise -arrow- and remove it from the tail lamp housing.

-- Remove the bulb from the bulb socket.

NOTE:

Ignore -item 2-.