LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1109 (Exterior Lights, Switches (Coupe)) >> 94 Exterior Lights, Switches >> High-Mounted Brake Lamp >> High-Mounted Brake Lamp Bulb, Removing And Installing >> High-Mounted Brake Lamp Bulb -M25-, Removing And Installing, Coupe >> Installing

High-Mounted Brake Lamp Bulb -M25-, Removing And Installing, Coupe: Installing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Connecting Electrical Connector
GWWA94-10521Courtesy of AUDI OF AMERICA, LLC

Install In Reverse Order Of Removal. Note The Following: 

NOTE:

If LED's Are Malfunctioning, High-Mount Brake Light Must Be Completely Replaced.

-- The mount -2- for the high-mounted brake lamp -3- must engage evenly at the left and right in the guide rails -1-.

-- Slide the high-mounted brake lamp evenly forward in the direction of travel without tilting it until it engages audibly -arrows-.