Headlamp Adjustment

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

The Horizontal Light-Dark Border -1- Must Touch The Dividing Line -4- On The Adjusting Unit Test Surface.

Fig 1: Headlamp Adjustment Graph
Courtesy of AUDI OF AMERICA, LLC
The Point -2- Must Be Positioned Exactly In The Center - Center Mark For The Line -3-.
After Making This Adjustment, Turn The Side Adjustment Bolt 3.5 Turns To Adjust The Side Adjustment Point -2- Toward The Left As Shown In The Illustration.

Fig 2: Headlamp Adjustment Graph
Courtesy of AUDI OF AMERICA, LLC
The Horizontal Light-Dark Border -1- Remains Unchanged.

NOTE:

3.5 Turns On The Site Adjusting Screw Creates An Adjustment Of 17.5 cm In Relation To A 10 M Projection Distance.

-- To Adjust The Height Of The Headlamp, Set The Light-Dark Border Just Under The Dividing Line With The Adjustment Screw -1-.

Fig 3: Identifying Adjustment Screw -1- & Adjusting Screw -2-

Courtesy of AUDI OF AMERICA, LLC

-- Then Adjust The Light-Dark Border On The Dividing Line Starting From The Bottom.

The Side Adjustment Bolt -2- Must Be Secured With The Plugs After The Adjustment Is Made. Plugs.

NOTE:

The Right Headlamp Layout Is A Mirror Image.