Socket Illumination Bulb -L42- /12 V Socket -U5-, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: Identifying Socket Illumination, 12V Socket Wire Bracket

Courtesy of AUDI OF AMERICA, LLC

-- Remove the center console. Refer to CENTER CONSOLE .

-- Unclip the wire from the mount -arrow-.

The release tabs -2- on the Cigarette Lighter Release Tool :T40148 must engage into the openings in the 12 V Socket -U5- -item 3- -arrow-. To do so, the threaded rod -1- must be slid downward until it stops.

Fig 2: 12 V Socket 5 -U26-
Courtesy of AUDI OF AMERICA, LLC

-- Open the cover -1- on the 12 V socket and hold it in this position.

Fig 3: Identifying T40148

Courtesy of AUDI OF AMERICA, LLC

-- Slide the Cigarette Lighter Release Tool:T40148 all the way into the 12 V Socket -U5-

-- Turn the thumbwheel -2- on the Cigarette Lighter Release Tool:T40148 clockwise all the way to the end stop.

The piston -2- is pulled upward and the release tabs -1- on the Cigarette Lighter Release Tool:T40148 spread -arrows-.

Fig 4: Identifying Release Tool T40148 In Use
Courtesy of AUDI OF AMERICA, LLC

-- Remove the 12 V Socket -U5- from the illumination ring with the Socket Illumination Bulb -L42- using the Cigarette Lighter Release Tool:T40148 .

-- Disconnect the connector.

-- Release the clips in direction of -arrow-.

Fig 5: Identifying Socket Illumination Bulb

Courtesy of AUDI OF AMERICA, LLC

-- Remove the illumination ring -1- with the Socket Illumination Bulb -L42- from the center console storage compartment -2-.