Tunnel-Side Trim, Removing And Installing, Bucket Seat: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the bucket seat. Refer to FRONT SEAT, REMOVING AND INSTALLING, BUCKET SEAT .
-- Secure the front bucket seat to the Engine/Transmission Holder - Seat Repair Fixture:VAS6136 . Refer to FRONT SEAT, MOUNTING ON FIXTURE FOR SEAT REPAIR .
-- Remove the right backrest cover. Refer to BACKREST COVER, REMOVING AND INSTALLING, BUCKET SEAT .
-- Remove the seat belt latch. Refer to FRONT SEAT BELT LATCH, REMOVING AND INSTALLING .
NOTE:
Do Not Disconnect The Electrical Harness Connectors.
-- Press the locking pin inward and remove the expanding clip -1-.
-- Release clip -3- in direction of -arrow A- and remove trim -2- on the tunnel side upward and toward the front in direction of -arrow B-.