LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1107 (SEAT FRAMES (1 Of 2) (COUPE)) >> 72 Seat Frames >> Front Seats >> Seat Height Adjuster Handle, Removing And Installing >> Seat Height Adjustment Handle, Removing And Installing, Bucket Seat >> Removing

Seat Height Adjustment Handle, Removing And Installing, Bucket Seat: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Pull Seat Height Adjustment Handle -2- Up As Far As The Stop And Hold It In That Position.

Fig 1: Pressing Retaining Clips Inward And Removing Seat Height Adjustment Handle From Lever
GWWA72-10153Courtesy of AUDI OF AMERICA, LLC

-- Use a narrow screwdriver to press retaining clip -1- toward the inside in direction of -arrow A- and remove the seat height adjustment handle from the lever in direction of -arrow B-.