Lock Cylinder, Removing And Installing, Rear Seat Backrest Locking Mechanism: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the trim for the retainer with lock cylinder. Refer To LOCKING MECHANISM TRIM, REMOVING AND INSTALLING, LOCKING MECHANISM WITH LOCK CYLINDER .
-- Make sure the indicator is in the >>top<< position.
CAUTION:
Only Remove And Install The Lock Cylinder With The Key Inserted Correctly. If That Is Not Done, The Tumblers And Compression Springs Can Fall Out And The Lock Cylinder Will Be Ruined.
-- Release the retaining tabs -bottom arrows- (quantity: 4) and press the lock cylinder -3- with the key -2- out of the trim -1-.