Rear Seat Belt Guide, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION:
- Do not rotate bolts -2- under any circumstances when removing and installing the seat belt guide -1-. They are set by the manufacturer.
- Replace the entire belt guide if damaged.
-- Remove the side trim panel. Refer to SIDE TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the foam part from the gap.
-- Release the belt guide retaining hooks in direction of -arrow-.
-- Slide the belt guide -1- back until the bolt heads -2- can be disengaged from the console on the body.
-- Rear outer right seat belt guide: Disconnect the connector from the Rear Parking Aid Warning Buzzer -H15-.
-- Thread the belt webbing out of the belt guide and remove the belt guide.