LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S4 Premium Plus, Standard Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 1101 (Passenger Protection, Airbags, Seat Belts (Coupe)) >> 69 Passenger Protection, Airbags, Seat Belts >> Seat Belts >> Front Belt End Fitting, Removing And Installing >> Removing

Front Belt End Fitting, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.

-- Move the front seat all the way forward to the stop.

-- Pry the cap -1- off using a screwdriver.

Fig 1: Identifying Front Belt Anchor Components
GWWA69-10297Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -2- and the front belt anchor -3-.

scientia non olet · About LEMON Manuals