Overview - Head Curtain Airbag
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
- Connector
- For Driver Head Curtain Airbag Igniter -N251- /Front Passenger Head Curtain Airbag Igniter -N252-
- Disconnecting and connecting. Refer to Removing
- Head Curtain Airbag
- Driver side: with Driver Head Curtain Airbag Igniter -N251-
- Passenger side: with Front Passenger Head Curtain Airbag Igniter -N252-WARNING:
Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Removing and installing. Refer to HEAD CURTAIN AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
- Nut
- 9 Nm
- On ground bolt
- Nut
- 9 Nm
- Always replace
- Bolt
- 3.5 Nm
- Always replace
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Self-locking
- Clip
- Always replace
- With a factory installed mount with 1 clip and double adhesive tape, use 2 clips for re-installing Parts Information.
- Quantity 1 or 2 depending on the version
- Bolt
- 3.5 Nm
- Always replace
- Threaded holes for screws must always be cleaned, for example, with thread cutter
- Self-locking
- Retaining Clips
- Removing and installing. Refer to Removing .