Airbag Connector, Replacing, Bolted Airbag Version: Installing
WARNING: This page does not describe the selected car, but rather 23 other vehicles, including the 2017 Audi S5, 2017 Audi A5 Quattro, 2016 Audi S5, 2016 Audi A5 Quattro, and 2015 Audi S5. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- Follow all Safety Precautions when working with pyrotechnic components. Refer to SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
Install in reverse order of removal. Note the following:
NOTE:
Make sure the connectors are installed correctly and are secure.
WARNING:
- Follow all pyrotechnic components safety precautions. Refer to PYROTECHNIC COMPONENTS SAFETY PRECAUTIONS .
- Before handling pyrotechnic components (for example, connecting the connector), the person handling it must "discharge static electricity". This can be done by touching the door striker, for example.
-- Connect the connector -1- to the airbag igniter in direction of -arrow A-.
-- Install the connector locking mechanism -2- in direction of -arrow B-. While doing this, the connector is pushed into the airbag igniter and locks into place.
Installation is performed in reverse order of removal, while noting the following:
NOTE:
Make sure the connectors are installed correctly and are secure.