Supercharger, Securing To Engine/Transmission Holder For Leak Test
NOTE:
The seals on the Gearbox Support Supplements T40206/2should seal off the openings in the supercharger housing during the leak test.
Special tools and workshop equipment required
- Engine and Gearbox Bracket VAS6095A VAS6095A
- Gearbox Support T40206 with T40206/1 and Gearbox Support Supplement T40206/2
Procedure
- Supercharger removed. Refer to SUPERCHARGER, REMOVING AND INSTALLING .
-- Insert the Gearbox Support T40206 with T40206/1 in the Engine and Gearbox Bracket VAS6095A.
-- Secure the supercharger to the transmission holder as illustrated. Use the holes "1", "4", "9", "11" and "13" for the threaded connectors -1-.
-- Attach the Gearbox Support Supplement T40206/2 directly to the supercharger housing at the front and on the right side using the bolt -2-.
Installation position of the Gearbox Support Supplement T40206/2:
- The seals on the support seal off the openings inside the supercharger housing.