Codes, Transmission Allocations, Ratios, Capacities (AUDI A4 From My 2008)
| Rear Final Drive | 0BF | ||||
|---|---|---|---|---|---|
| Codes | LFU | LFV | LFW | ||
| Ratio | Final drive Z2 : Z1 | 35 : 9 = 3.889 | 37 : 9 = 4.111 | 43 : 13 = 3.308 | |
| Driveshaft flange diameter | 75.5 mm | 75.5 mm | 75.5 mm | ||
Gear oil - capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||
ATF capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||
| Rear Final Drive | 0BF | ||||
|---|---|---|---|---|---|
| Codes | LGH | LGJ | MBV | ||
| Ratio | Final drive Z2 : Z1 | 37 : 10 = 3.700 | 35 : 8 = 4.375 | 35 : 9 = 3.889 | |
| Driveshaft flange diameter | 75.5 mm | 75.5 mm | 75.5 mm | ||
Gear oil - capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||
ATF capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||
| Rear Final Drive | 0BF | ||||
|---|---|---|---|---|---|
| Codes | MBW | MKU | MKV | ||
| Ratio | Final drive Z2 : Z1 | 37 : 10 = 3.700 | 37 : 9 = 4.111 | 43 : 13 = 3.308 | |
| Driveshaft flange diameter | 75.5 mm | 75.5 mm | 75.5 mm | ||
Gear oil - capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||
ATF capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||
| Rear Final Drive | 0BF | ||||
|---|---|---|---|---|---|
| Codes | MKW | MKX | MKY | ||
| Ratio | Final drive Z2 : Z1 | 35 : 8 = 4.375 | 35 : 9 = 3.889 | 37 : 10 = 3.700 | |
| Driveshaft flange diameter | 75.5 mm | 75.5 mm | 75.5 mm | ||
Gear oil - capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||
ATF capacity
|
Refer to appropriate FLUID CAPACITY TABLE information in MAINTENANCE article . | ||||