Hood, Adjusting

Special tools and workshop equipment required 

• Gauge - Gap Adjustment 3371

Gap Dimensions for Hood

Fig 1: Hood Gap Dimensions Points

Courtesy of AUDI OF AMERICA, LLC

• Dimension A = 5.0 mm
• Dimension B = 4.5 mm
• Dimension C= 5.0 mm
• Dimension D = 3.0 mm
• Dimension E = 4.5 mm

Fig 2: Height Adjustment Stop Buffer

Courtesy of AUDI OF AMERICA, LLC

• The adjusting buffer -2- must lightly contact the lock carrier when the hood is closed.
• The rubber buffer -1- also works as a strike guard.