Covers And Cushions, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the rear seat backrest, refer to REAR SEAT BACKREST, REMOVING AND INSTALLING .

-- Remove the rear head restraint, refer to HEADREST, REMOVING AND INSTALLING .

-- Remove the cover for the child seat anchor, refer to REAR CHILD SEAT ANCHOR, REMOVING AND INSTALLING, REAR SEAT BACKREST .

-- Remove the locking bracket cover, refer to REAR SEAT BACKREST LOCKING BRACKET, REMOVING AND INSTALLING .

-- Open the clamping strip -1- for the cover.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the clips for the backrest shell cover with the Pry Lever:80-200 on the corner -arrows-.

-- Open the zipper -1- for the cover on both sides.

Courtesy of AUDI OF AMERICA, LLC

-- Starting at the bottom, carefully loosen the cushion from the backrest shell adhesive strips.

-- Carefully disengage the cover and cushion from the headrest guides and remove.