Lower Seat Frame Cover And Cushion, Assembly Overview, Standard Seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

A version with a leather cover is shown in the illustration.

Fig 1: Exploded View Of Seat Pan Cover And Cushion (Standard Seat)

Courtesy of AUDI OF AMERICA, LLC

Seat Pan
Seat Cushion
- Allocation, refer to the Parts information.
- Seat cover and cushion, removing and installing, refer to LOWER SEAT FRAME COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD SEAT .
- Separate the seat cover from the seat cushion, refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, STANDARD SEAT .
Cushion Clip
- For attachment of seat cover to seat cushion
- Replace after removing
- Install at the same location with Upholstery Clip Pliers :VAG1634 .
Seat Cover
- Vehicles with:
  - Fabric
  - Leather
- Allocation, refer to the Parts information.
- Seat cover and cushion, removing and installing, refer to LOWER SEAT FRAME COVER AND CUSHION, REMOVING AND INSTALLING, STANDARD SEAT .
- Separate the seat cover from the seat cushion, refer to LOWER SEAT FRAME COVER AND CUSHION, SEPARATING, STANDARD SEAT .
- Make sure there are no folds after installing
Molding
- Sewn into seat cover
- For engaging seat cover on seat pan upper frame
- Make sure it fits correctly in the upper seat frame
Molding
- Sewn into seat cover
- For engaging seat cover on seat pan upper frame
- Make sure it fits correctly in the upper seat frame