Backrest Cover And Cushion, Assembly Overview, Standard Seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

A version with a leather cover is shown in the illustration.

Fig 1: Exploded View Of Backrest Cover And Cushion (Standard Seat)

Courtesy of AUDI OF AMERICA, LLC

Cushion Clip
- For securing cover to upholstery
- Replace after removing
- Install at the same location with Upholstery Clip Pliers :VAG1634 .
Molding
- Sewn into cover
- For attaching the cover to the backrest frame
- Make sure it fits correctly inside the backrest frame
Cover
- Vehicles with:
  - Fabric
  - Leather
- Allocation, refer to the Parts information.
- Covers and cushions, removing and installing, refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
- Cover and cushion, separating, refer to BACKREST COVER AND CUSHION, SEPARATING .
- Make sure there are no folds after installing
Pocket
- For side airbag
- Sewn into cover
Backrest Frame
Cushion
- Allocation, refer to the Parts information.
- Covers and cushions, removing and installing, refer to BACKREST COVER AND CUSHION, REMOVING AND INSTALLING .
- Cover and cushion, separating, refer to BACKREST COVER AND CUSHION, SEPARATING .