Headrest Cover And Cushion, Removing And Installing: Removing

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the headrest, refer to HEADREST, REMOVING AND INSTALLING .

-- Open the side openings -arrows- on the cover -1-.

-- Insert the Trim Removal Wedge :3409 or a flat-head screwdriver between the openings -1- in direction of -arrow A-.

Courtesy of AUDI OF AMERICA, LLC

-- Tension the lower U-channel -3- in direction of -arrow B-.

-- Remove the upper side of the cover with the flat channel -2- from the U-channel.

-- Open the zipper by inserting the Trim Removal Wedge :3409 or a flat-head screwdriver between the zipper and the cover.

Courtesy of AUDI OF AMERICA, LLC

-- Tension the lower U-channel -1- in direction of -arrow A-.

-- Remove the upper side of the cover with the flat channel -2- from the U-channel -1-.

NOTE:

The cover must be completely open to remove the upholstery.

-- Remove the cover and cushion from the headrest mount.

-- Remove cushion -1- out of cover -2-.

Courtesy of AUDI OF AMERICA, LLC