Headrest Cover And Cushion, Removing And Installing: Installing
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2017 Audi A3 Quattro, 2017 Audi A3, 2016 Audi A3 Quattro, 2016 Audi A3, and 2015 Audi A3 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Insert cushion -1- with proper fit in cover -2-.
-- Insert headrest support in the cushion with cover.
-- Close the main zipper by moving the upper cover flat channel -1- over the cover -2-.
-- Push the edge of the material with the flat channel into the U-channel -5-.
-- Push the side locks in the same way.
-- With a needle or pointed object, line up the cover and the channels.
-- Make sure the cover lies on the cushion -3- without any wrinkles and without seam markings.
Install in reverse order of removal.