Toothed Belt, Removing And Installing: Assembling
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
The rest of the assembly is performed in reverse order of removal, noting the following:
- Replace the seals.
-- Tighten the camshaft holder -1-.
-- Install the lower toothed belt guard. Refer to LOWER TOOTHED BELT GUARD, REMOVING AND INSTALLING .
-- Install the upper toothed belt guard. Refer to UPPER TOOTHED BELT GUARD, REMOVING AND INSTALLING .
-- Install the engine support. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .