Fuel Injector Seals, Removing And Installing: Procedure
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the fuel injector in question. Refer to FUEL INJECTORS, REMOVING AND INSTALLING .
-- Install the :T40195 into the seal -1-.
-- Attach the :T10133/3 to the seal puller with the :T10133/2 as shown in the illustration and remove it by tapping it upward.
-- Install the new fuel injector seal with the :3390 and short extension -1- all the way and from above in direction of -arrow-.