Overview - Cylinder Head: Notes
WARNING: This page is about a different car, the 2017 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
- Cylinder Head Gasket
- Replace after removing.
- Installed position: the part number faces the cylinder head
- Change the coolant and engine oil after replacing
- Alignment Pin
- Quantity: 2
- Cylinder Head
- Removing and installing. Refer to CYLINDER HEAD, REMOVING AND INSTALLING .
- Checking for distortion. Refer to CYLINDER HEAD, CHECKING FOR DISTORTION .
- Change the coolant and engine oil after replacing
- Bolt
- Replace after removing.
- Loosening. Refer to LOOSENING THE CYLINDER HEAD .
- Tightening specification and sequence. Refer to CYLINDER HEAD - TIGHTENING SPECIFICATIONS AND SEQUENCE .
- Heat Shield
- Bolt
- First tightening 5 Nm
- Second tightening 9 Nm
- O-ring
- Replace after removing.
- Coat with coolant
- Bolt
- 9 Nm
- Connection
- For coolant hose
- Bolt
- Replace after removing.
- Loosening. Refer to LOOSENING THE CYLINDER HEAD .
- Tightening Specifications and Sequence. Refer to CYLINDER HEAD - TIGHTENING SPECIFICATIONS AND SEQUENCE .
- O-ring
- Replace after removing.
- Coat with coolant
- Bolt
- 9 Nm
- Connection
- For coolant hose
- Engine Lifting Eye
- Bolt
- 10 Nm +90°
- Replace after removing.
- Partition Plate
- Engine Lifting Eye
- Bolt
- 10 Nm +90°
- Replace after removing.