Overview - Assembly Mounts

Fig 1: Exploded View Of Assembly Mounts

Courtesy of AUDI OF AMERICA, LLC

1. Bolt
   • Replace after removing
   • Tightening sequence. Refer to Fig 2.
2. Engine Support
   • Removing and Installing. Refer to ENGINE SUPPORT, REMOVING AND INSTALLING .
3. Engine Mount
   • With support arm
   • Removing and Installing. Refer to ENGINE MOUNT, REMOVING AND INSTALLING .
4. Bolt
   • Replace after removing
   • 40 Nm +90°
5. Bolt
   • Replace after removing
   • 20 Nm +90°
6. Bolt
   • Replace after removing
   • 40 Nm +90°
7. Bolt
   • Replace after removing
   • 60 Nm +90°
8. Pendulum Support
   • There are different versions. Refer to the Parts Information for the allocation.
   • Removing and Installing. Refer to PENDULUM SUPPORT, REMOVING AND INSTALLING .
9. Bolt
   • Replace after removing
   • Tightening specification and sequence. Refer to Fig 3.
10. Bolt
    • Replace after removing
    • Tightening specification and sequence. Refer to Fig 3.
11. Bolts
    • Replace after removing
    • Tightening specification and sequence. Refer to Fig 3.
12. Bolt
    • Replace after removing
    • 60 Nm +90°
13. Bolt
    • Replace after removing
    • 60 Nm +90°
14. Transmission Mount
    • With support arm
    • Removing and Installing. Refer to TRANSMISSION MOUNT, REMOVING AND INSTALLING .
15. Bolt
    • Replace after removing
    • 50 Nm + 90°
16. Bolt
    • Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .
17. Transmission Support
    • For vehicles with manual transmission
18. Bolt
    • Tightening specification. Refer to OVERVIEW - SUBFRAME MOUNT .

Engine Support - Tightening Specification and Sequence 

Fig 2: Engine Support Tightening Sequence

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps in the tightening sequence shown:

Installing the pendulum support 

Fig 3: Identifying Bolts

Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in the steps in the sequence shown: