LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Prestige >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood, Lids -- (A3 Sedan) >> 55 Hood, Lids >> Rear Lid >> Rear Lid Seal, Removing And Installing >> Rear Lid Seal, Removing And Installing, A3 And SPORTBACK

Rear Lid Seal, Removing And Installing, A3 And SPORTBACK

GWWA55-10860Courtesy of AUDI OF AMERICA, LLC
  1. Rear Lid
  2. Rear Lid Seal

    -- Remove to remove the seal from the body flange.

    -- Before installing loosen the bumper cover and remove slightly from behind. Refer to BUMPER COVER, REMOVING AND INSTALLING .

    -- Align the seal with the butt joint -arrow- to the above vehicle center.

    -- Beginning at the butt joint, press the seal all around onto the body flange.

    -- Install the bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

  3. Body Flange
scientia non olet · About LEMON Manuals