LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Prestige >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> Hood, Lids -- (A3 Sedan) >> 55 Hood, Lids >> Hood >> Latch Release Lever, Removing And Installing >> Remove The Operating Lever Handle

Remove The Operating Lever Handle

GWWA55-10877Courtesy of AUDI OF AMERICA, LLC
  1. Release Lever
  2. >>A-Pillar<< Lower Trim
  3. Clip
    • Press in completely, it must engage at the same time.
  4. Release lever handle
    • First disengage the cable from the coupling inside the engine compartment. Refer to RELEASE CABLE, REMOVING AND INSTALLING .
    • Pry the clip out of the release lever.
    • Remove the handle from the side of the operating lever.
scientia non olet · About LEMON Manuals