Overview - Selector Mechanism
Courtesy of AUDI OF AMERICA, LLC
- Selector Lever Cable
- Cannot be replaced separately
- Do not lubricate
- Nut
- 8 Nm
- For selector mechanism to body
- Quantity: 4
- Bolt
- 4 Nm
- For the selector mechanism to the selector housing
- Quantity: 4
- Selector Mechanism
- The following components are combined into a single component
- Selector Lever -E313-
- Selector Lever Sensor System Control Module -J587-
- Selector Lever Park Position Lock Switch -F319-
- Shift Lock Solenoid -N110-
- Selector lever cable
- The components cannot be replaced separately
- To check the components, use the Vehicle Diagnostic Tester in Guided Fault Finding
- Selector mechanism emergency release. Refer to EMERGENCY RELEASE FROM P .
- Selector mechanism, removing and installing. Refer to SELECTOR MECHANISM, REMOVING AND INSTALLING .
- Selector Housing
- Base Plate
- Always replace after removing
- Clips
- Always replace after removing
- Bolt
- 13 Nm
- Selector lever cable adjusting bolt
- Joint Piece
- Selector Lever
- Nut
- Lock Washer
- Cable Bracket
- For the selector lever cable
- Bolt