Charge Air Cooler, Removing And Installing: Removing
WARNING: This page is about a different car, the 2017 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
-- Pay attention to the guidelines for clean working conditions. Refer to REPAIR INFORMATION .
-- Remove the radiator. Refer to RADIATOR, REMOVING AND INSTALLING .
-- Loosen the clamps -1 and 2- and remove the air guide hose.
-- Seal the open lines and connections with clean plugs from the :VAS6122 .
-- Unlock the catch in direction of -arrow- and remove the cover -1- toward the front.
-- Unclip the left and right air duct -2- downward in direction of -arrow B-.
-- Open the left and right retainers in direction of -arrow A-, and disengage the condenser -3- from the charge air cooler -1-.
-- Secure the condenser to the lock carrier.
-- Remove the charge air cooler.
-- Remove the charge air cooler downward.