Coolant Shut-Off Valve -N82-, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

-- Remove the air filter housing. Refer to AIR FILTER HOUSING, REMOVING AND INSTALLING .

-- Loosen the hose clamp -2-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolt -1- and push the left air duct pipe slightly to the left.

Version with Secondary Air System:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -1-.

-- Press the release buttons on both sides and remove the secondary air injection pipe -2-.

Continuation for All Vehicles:

Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the connector -2-.

-- Clamp the coolant hoses on Coolant Shut-Off Valve -N82- with the :3094 .

NOTE:

Place a cloth underneath to catch any leaking coolant.

-- Loosen the hose clamps -1- and remove the coolant hoses.

-- Remove the bolts -arrows- and remove the Coolant Shut-Off Valve -N82-.