Valve Stem Seals, Removing And Installing, Cylinder Head Removed: Notes

WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Special Tools And Workshop Equipment Required

Puller - Valve Seal:3364
Seal Installer - Valve Stem:3365 for valve stem seal with a simple sealing lip. Refer to Figure .
Seal Installer - Valve Stem:T40376/1 , for valve stem seal with a double sealing lip. Refer to Figure .
Valve Keeper Tool Kit:VAS 5161A
Valve Keeper Tool Kit Pressure Fork with Lever for Assembly Cartridge:VAS5161/2
Valve Cotter Tool Kit - Punch:VAS5161/3A
Guide Forks M6/M8 with Threaded Studs:VAS5161/5
Retainer:VAS5161/6
Valve Cotter Tool Kit - Assembly Cartridge:VAS5161/8A
Knurled Thumb Screws M6:VAS5161A/12
Valve Cotter Tool Kit - Valve Insertion Device:VAS5161/18
Valve Cotter Tool Kit - Guide Plate 19c:VAS5161/19C
Engine and Transmission Holder:VAS6095A
Cylinder Head Tensioning Device:VAS6419
Mounting Sleeve. Refer to parts information