LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (CRANKSHAFT, CYLINDER BLOCK [4-Cylinder 2.0L 4V TFSI Engine] -- (A3)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Ribbed Belt TENSIONER, Removing And Installing >> Installing

Ribbed Belt TENSIONER, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the ribbed belt. Refer to RIBBED BELT, REMOVING AND INSTALLING .

There are additional procedures depending on the model. Refer to RIBBED BELT TENSIONER, REMOVING AND INSTALLING .

scientia non olet · About LEMON Manuals