LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 45 (Passenger Protection, Airbags, Seat Belts -- (Cabriolet)) >> 69 Passenger Protection, Airbags, Seat Belts >> Knee Airbags >> Overview - Knee Airbag

Overview - Knee Airbag

WARNING: This page is about a different car, the 2017 Audi A3, 2016 Audi A3, and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Exploded View Of Knee Airbag
GWWA69-10879Courtesy of AUDI OF AMERICA, LLC
  1. Driver Knee Airbag Igniter -N295-
    • Removing and installing, refer to KNEE AIRBAG WITH IGNITER, REMOVING AND INSTALLING .
      CAUTION:

      There is a risk of causing damage to the surface of the knee airbag due to mechanical stress.

      • After finishing work perform a visual inspection if the surface of the knee airbag especially along the area of the perforation is undamaged.
  2. Bolting Point
    • For knee airbag
      CAUTION:

      There is a risk of malfunctions do to a faulty Ground (GND) connection.

      • The counter threaded and contact surface must be free of paint, coating, and corrosion, the threaded connection serves as the GND connection for the knee airbag.
  3. Bolt
    • 8 Nm
    • Quantity: 3
    • Replace after removing
  4. Connector
    • for the Driver Knee Airbag Igniter -N295-
scientia non olet · About LEMON Manuals