LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (CYLINDER HEAD, VALVETRAIN (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 15 Cylinder Head, VALVETRAIN >> VALVETRAIN >> Valve Shaft Seals, Removing And Installing >> Valve Shaft Seals, Removing And Installing, Cylinder Installed >> Assembling

Valve Shaft Seals, Removing And Installing, Cylinder Installed: Assembling

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Assembly is performed in the reverse order of disassembly, noting the following:

-- Make sure all the roller rocker levers lie on the ends of the valve stems correctly and are clipped onto the respective hydraulic adjusting elements.

-- Install the camshaft housing. Refer to CAMSHAFT HOUSING, REMOVING AND INSTALLING .

-- Install the glow plugs. Refer to OVERVIEW - PREGLOW SYSTEM .

scientia non olet · About LEMON Manuals