Camshaft Adjustment Valve 1 - N205- Control Valve, Removing And Installing: Installing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal. Note the following:

Replace the O-ring after removing.

-- Install the noise insulation -1-. Refer to NOISE INSULATION .

-- Install the upper toothed belt guard. Refer to UPPER TOOTHED BELT GUARD, REMOVING AND INSTALLING .

-- An adaptation must be performed after replacing or removing and installing by using the Vehicle Diagnostic Tester under Guided Functions , 01 - Adapting the Electric Actuator with Feedback .