Compression, Checking: Assembling
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Assemble in the reverse order of removal. Note the following:
-- Remove all glow plugs. Refer to GLOW PLUG, REMOVING AND INSTALLING .
-- Install the engine cover. Refer to ENGINE COVER, REMOVING AND INSTALLING .
-- If there are any faults stored in the DTC memory that occurred during testing, erase them on the Vehicle Diagnostic Tester, Guided Functions , check DTC memory .