Camshaft Housing, Removing And Installing: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special Tools And Workshop Equipment Required
- Socket Bit XZN 10:T10501 or TORX® ball head T30, commercially available
- Applicator Gun:VAS6966
- Hand Drill with Plastic Brush Attachment
- Protective Eyewear
- Sealant. Refer to the Parts Information.
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Camshaft housing
- Seal - Emissions control system
- Screw-Type clamp - Emissions control system