LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 15 (CRANKSHAFT, CYLINDER BLOCK (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 13 Crankshaft, Cylinder Block >> Cylinder Block, Belt Pulley Side >> Overview - Sealing Flange, Belt Pulley Side >> Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications And Sequence

Ribbed Belt Pulley Side Sealing Flange - Tightening Specifications And Sequence

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
GWWA13-10948Courtesy of AUDI OF AMERICA, LLC

-- Tighten the bolts in steps in the sequence shown:

Step Bolts Tightening Specification
1. -1 to 10- Install the bolts all the way in by hand
2. -1 to 6- Diagonally in steps at least to 13 Nm
3. -7 to 10- 13 Nm
scientia non olet · About LEMON Manuals