Auxiliary Components Bracket, Removing And Installing: Removing

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the generator. Refer to GENERATOR .

-- Remove the high pressure pump. Refer to HIGH PRESSURE PUMP, REMOVING AND INSTALLING .

-- Remove the nut -2- and the bolt -1-, push the front right coolant pipe slightly forward.

Courtesy of AUDI OF AMERICA, LLC

-- Unclip the bracket -1- with the fuel hoses.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -arrows-.

-- Remove the bolt -arrow- and remove the damper roller.

Courtesy of AUDI OF AMERICA, LLC

-- Loosen the bolts in sequence -6 to 1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts, and remove the auxiliary components bracket.