Emissions Control Module Bracket - Tightening Specifications And Tightening Sequence
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
 Courtesy of AUDI OF AMERICA, LLC
|
-- Bring the bracket into the installed position.
-- Tighten the bolts in steps according to the sequence:
| Step |
Bolts |
Tightening Specifications |
| 1. |
-1, 2, 3, and 4- |
Install by hand all the way |
| 2. |
-2- |
20 Nm |
| 3. |
-1- |
40 Nm |
| 4. |
-3 and 4- |
40 Nm |