LEMON Manuals: Even more car manuals for everyone
Home >> Audi >> 2016 >> S3 Premium Plus >> Repair and Diagnosis >> External Pages >> Different car >> Section 13 (DIESEL FUEL INJECTION (4-Cylinder TDI Common Rail 1.6L; 2.0L 4V Engine) -- (A3 SEDAN)) >> 23 Diesel Fuel Injection >> Intake Manifold >> Overview - Intake Manifold >> Intake Manifold With Charge Air Cooler - Tightening Specification And Sequence

Intake Manifold With Charge Air Cooler - Tightening Specification And Sequence

WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Intake Manifold Charge Air Cooler Tightening Sequence
GWWN23-10558Courtesy of AUDI OF AMERICA, LLC

-- Tighten the new bolts in steps:

Step Bolts Tightening Specification
1. -1 to 10- Install the bolts all the way in by hand
2. -1 to 10- Tighten to 20 Nm. 
3. -1 to 10- Tighten 90° additional turn
scientia non olet · About LEMON Manuals