Engine, Removing: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Pry Lever:80-200
- Engine and Gearbox Jack:VAS6931
- Step Ladder:VAS5085
- Engine Bung Set:VAS6122
- Shop Crane - Drip Tray:VAS6208
- Hose Clip Pliers:VAS6362
- Locking Pin:T10060A
- Engine Support:T10497 with Pin:T10497/1
- Protective eyewear
- Protective gloves
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Engine mount
- Screw type clamp - Front exhaust pipe
- Gasket - Front exhaust pipe
- Bolts - Driveshaft to bevel box
- Bolts - Subframe mount
- Bolts - Transmission mount
- Bolts - Bevel box mount
- Bolts - Engine to transmission