Transmission Mount, Removing And Installing: Notes
WARNING: This page is about a different car, the 2016 Audi A3 and 2015 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.
Special tools and workshop equipment required
- Engine Support Bridge:10-222A
- Engine Support:10-222A/31A
- :T40091/3 from the Engine Support - Basic Set:T40091
- :T40093/3-5 from the Engine Support Supplement Kit:T40093A
- :T40150/4 from the Engine Support Bracket:T40150
CAUTION:
This procedure contains mandatory replaceable parts. Refer to component overview prior to starting procedure.
Mandatory Replacement Parts
- Bolts - Transmission mount
Tool Development
-- If the adapter for the :10-222A/4 does not have the indicated holes -arrow- shown they must be added.
- Dimension -a- = 225 mm.
- Hole diameter = 12.5 mm